Home/
Products/
Bioprocessing/
AseptiQuik DC

AseptiQuik DC

AseptiQuik® DC Connector is the first all-in-one single-use connection technology to offer both a sterile connection and a sterile disconnection. With the new AseptiQuik DC connector, manufacturers can make quick and easy sterile connections, even in non-sterile environments.

AseptiQuik DC's intuitive CLICK-PULL-TWIST design enables users to transfer media easily with less risk of operator error. After transfer is complete, a simple one-step disconnection maintains media sterility by preventing external organisms from entering into the media flow path.

The connector's robust design and automatic shutoff valves provide reliable performance without the need for clamps, fixtures or tube welders.

Validation Reports

Features and Benefits

Features		Benefits
	CLICK-PULL-TWIST Design		Intuitive three-step connection process reduces risk of operator error
	Simple One-Step Disconnection		Maintains media sterility
	Membrane Pull Tabs		Ensure simultaneous and secure removal of both membranes
	Automatic Shutoff Valves		Eliminate the need for pinch clamps or tube welders
	Robust Construction		Integrated lock ring and innovative seal technology ensure reliable performance
	Market Availability		Open access through multiple supply chain partners

Specifications

Pressure:	Up to 60 psi, 4.1 bar
Temperature:	39°F to 104°F (4°C to 40°C)
Typical Flow Rate:	Cv~ .077 to 1.9

Materials:
Connector:	Polycarbonate (white), USP Class VI, ADCF
Lock Ring and Thumblatch:	Polycarbonate (blue), USP Class VI, ADCF
Pull Tabs:	Polycarbonate (blue, standard version), USP Class VI, ADCF
Caps:	Polypropylene (clear), USP Class VI, ADCF
Seals:	Silicone (clear), platinum-cured, USP Class VI, ADCF
Membrane:	Polyethylene (standard version)
Springs:	316 Stainless steel
Termination Size:	1/4" (6.4mm), 1/2"(12.7mm) and 3/8" (9.5mm) hose barb

Sterilization:
Gamma:	Up to 50kGy irradiation




WARNING: Pressure, temperature, chemicals and operating environment can affect the performance of couplings. It is the customer’s responsibility to test the suitability of Colder products in their own application conditions.